Across south-eastern Australia this morning, people are waking up to forecasts of scorching heat for the week ahead. Players and spectators heading to the Australian Open should prepare for some baking hot days at the tennis: 35°C today, rising to 41°C on Tuesday, with temperatures in the high 30s or low 40s expected to linger until the weekend.

Coming after a relatively mild summer weekend, many of us will be wondering why it’s got so hot, so quickly.

That was the question my colleagues and I asked ourselves a year ago, when we began looking at the causes of severe heat waves. In particular, we wanted to know what made the 2009 summer heat wave – which set new records for the most days above 40°C in many parts of south-eastern Australia, and which killed hundreds of people – quite so deadly. Were there any hidden culprits behind the record-breaking spell of fierce heat?

What we discovered was that a seemingly unrelated tropical cyclone off the Western Australian coast contributed to making the south-eastern Australian heat wave worse.

And what’s about to happen with this week’s heat is a textbook example of what we found.

Watching wild weather in the west

Click to enlarge

This week, a tropical low is forecast to intensify over northern Western Australia, and a trough will extend from north-west to south-east across the state. Whether or not a tropical cyclone develops, the effects of these low pressure systems will be felt as far away as Melbourne and Hobart.

Our recent research in the internationally peer-reviewed journal Geophysical Research Letters explains how tropical lows and tropical cyclones affect heat waves in south-eastern Australia.

In late January 2009, Tropical Cyclone Dominic hit the Western Australian coastline, causing minor structural damage and bringing down power lines in the small Pilbara town of Onslow. Flooding of a nearby river resulted in significant crop damage, and caused a train to derail near Kalgoorlie.

But as cyclones go, Dominic wasn’t so bad: at its peak, the cyclone only reached category 2 status, well below the most severe category 5 level.

Yet as our research showed, even at that level, the cyclone over in Western Australia still had powerful downstream effects for the extreme heat wave across South Australia, southern New South Wales, Victoria and Tasmania in late January and into early February 2009.

During this heat wave, Ambulance Victoria was swamped with a record number of emergency calls, while the Adelaide morgue ran out of room.

Click to enlarge

Later, the Victorian Department of Health estimated that 374 “excess deaths” occurred in the week of January 26 to February 1 2009. Although it is not possible to directly attribute mortality solely to the heat wave, there was a clear spike above the normal death rate, highlighting the health risks of heat waves, particularly for elderly people.

So how did Tropical Cyclone Dominic increase the intensity of that heat wave? And how do tropical lows in Australia’s west – like the one we’re seeing again this week – affect the weather as far away as south-eastern Australia?

When the pressure’s on

It turns out that the position of the tropical cyclone, rather than its size or severity, is what really makes a difference.

It doesn’t even need to be a full-blown cyclone; as we’re currently seeing, even a tropical low can have a big impact on south-eastern Australia’s weather.

Heat waves in Victoria are associated with slow-moving high pressure systems, or anticyclones. These surface highs hang around over the Tasman Sea for several days, bringing hot northerly winds from the interior of the continent.

During heat waves in Victoria, there is also a similar anticyclone at higher levels in the atmosphere.

These upper level anticyclones form when very long, planetary-scale waves in the atmosphere (known as Rossby waves) break to the south of Australia.

Our recent research showed for the first time in Australia how those upper level anticyclones have been present in all of the most severe heat waves in Victoria over the past two decades.

How cyclones work

The circulation around tropical cyclones at low levels is cyclonic, as air spirals in a clockwise direction (in the Southern Hemisphere; it spirals the other way in the Northern Hemisphere) into the centre of the storm where the pressure is lowest.

At upper levels, the air flows out again from the centre, and its nature changes to anticyclonic, switching to rotate in an anti-clockwise direction.

This outflowing air can intensify heat waves over Victoria in two ways. The first is when the outflow “nudges” the upper level jet stream, the band of strong westerly winds that circle the globe at mid-latitudes in both hemispheres.

When the outflowing air from the tropical cyclone nudges the jet stream south of western Australia, the disturbance generates more waves. This results in a stronger upper level anticyclone over Victoria.

The second way in which the intensification can occur is a direct result of the anticyclonic properties of the outflowing air. The outflowing air can be carried by the winds directly into the upper level anticyclone over Victoria.

The more intense the upper level anticyclone over Victoria, the more persistent it will be. This makes it more likely that a heat wave will form as higher temperatures continue for several days.

You can imagine this as being a bit like putting a pebble into a stream. The larger the pebble, the harder it will be for the water to shift it, and the more likely it is that the pebble will remain in place for a while as the water flows around it.

The cyclone effectively makes the pebble that is the anticyclone a little bit bigger, so that it stays stationary for longer.

Our improved understanding of how heat waves form should help weather forecasters better predict when extreme heat waves will hit Victoria.

It will also help in studies of how the intensity and duration of heat waves might change in the future due to climate change.

But in the short-term, when the heat is on at Rod Laver Arena this week: take a look way out west – and watch out for those cyclones.

Extraordinary Call for Increase to Migrant Worker Program

Iran to start destroying some enriched uranium when nuclear deal begins on January 20

Posted 1 hour 5 minutes ago

Photo: Iran will destroy its stockpile of higher levels of enriched uranium. (Reuters: Raheb Homavandi)

Related Story: US cites companies for breaking Iran sanctions

Related Story: Iran reaches deal with world powers on nuclear program

Related Story: Explained: What the Iran nuclear program deal means

Map: Iran, Islamic Republic Of

A deal between Iran and six major powers, intended to pave the way to a solution to a long standoff over Tehran’s nuclear ambitions, will come into force on January 20.

“Beginning January 20th, Iran will for the first time start eliminating its stockpile of higher levels of enriched uranium and dismantling some of the infrastructure that makes such enrichment possible,” a statement from the White House said.

US president Barack Obama says he is under “no illusions” as to how hard it will be to reach a comprehensive resolution.

Under the deal reached in November, Iran agreed to curb parts of its nuclear drive for six months in exchange for receiving modest relief from international sanctions and a promise by Western powers not to impose new measures against its hard-hit economy.

Such relief would include suspension of some restrictions on trade in gold, precious metals and petrochemicals, and in the auto industry.

The deal allows third-country purchases of Iranian oil to remain at current levels. About $4.6 billion in oil revenues will also be allowed to be transferred to Iran.

Western nations and Israel have long accused Iran of pursuing a nuclear weapons capability alongside its civilian program, charges denied by Tehran.

Senior diplomats meeting in Geneva have been working on how to implement the deal.

US secretary of state John Kerry says the next stage in talks will be “very difficult”.

Mr Obama added in the White House statement: “We have made concrete progress. I welcome this important step forward, and we will now focus on the critical work of pursuing a comprehensive resolution that addresses our concerns over Iran’s nuclear program.

“For the sake of our national security and the peace and security of the world, now is the time to give diplomacy a chance to succeed.”

AFP/Reuters

Business group calls for immigration increase to 220,000

Updated 7 minutes ago

Photo: The Ai Group says residential construction is a sector that needs more skilled migration. (Michael Janda: ABC News)

Map: Australia

A business lobby group is urging the Federal Government to boost Australia’s immigration intake by more than 15 per cent next year.

The Australian Industry Group wants the Government to increase the immigration intake from 190,000 this financial year to 220,000 in 2014-15, with a particular focus on skilled migrants.

The Ai Group’s chief executive Innes Willox says now is the right time to accelerate skilled migration given Australia’s ageing workforce and skills shortages in industries including mining, construction, engineering and health.

“The Australian Workplace Productivity Agency has identified that Australia will need an increase of about 2.8 million people with quite specific skills over the next decade to fill some of those gaps,” he said.

“We need to find ways to fill those gaps, and obviously we can train our own, but the quickest stop gap measure is to import skills.”

The Ai Group says further increases from the 220,000 level may be needed in future years, despite unemployment currently sitting at 5.8 per cent and tipped to rise well above 6 per cent by Treasury, the Reserve Bank and many private sector forecasters.

Mr Willox says while there are Australians without work, there are not enough skilled workers for a range of specialist occupations, with the Ai Group singling out residential construction as an area of acute shortages.

He says increasing education and training is a desirable long-term solution, but immigration is a useful stop gap measure.

“That’s definitely something we should be doing but that takes time,” Mr Willox argued.

“Employers are increasingly concerned about the skill levels of graduates both from universities and schools, and this is something that we need to address.

“We’ve seen Australia slipping down the tables when it comes to those basic skills around our science, technology, engineering, mathematics skills.”

Topics: business-economics-and-finance, immigration, federal-government, unemployment, australia